Chauvet Indoor Furnishings ZX 30RG User Manual

Precision Series  
ZX-30RG  
User Guide  
Please read these instructions carefully before use  
World-wide Headquarters:  
3000 North 29th Ct.  
Hollywood, Florida, USA 33020  
Tel: +1-954-929-1115 Fax: +1-954-929-5560  
 
Features  
Removeable Head -To use the ZX-30RG as a projector, the head may be removed. In order to  
remove the head, simply unscrew the four screws holding the head bracket to the body of the unit  
and unplug the connecting cable.  
Selectable Scanning Range - The ZX-30RG offers the user a choice of 3 scanning ranges (180, 150  
or 120 degrees). To select the desired scanning range, simply put the set screw in the hole marked  
with the range required.  
Function - The ZX-30RG offers the user a choice of either static or scanning. This feature is con-  
trolled by the 2 position switch on the bottom of the unit (located just above the fan). This controls  
only the scanning mirror. The gobo will always be rotating.  
Color - The ZX-30RG comes complete with 4 dichroic glass filters (red, green, yellow and blue). To  
insert the filter, unscrew the filter holder on the bottom of the unit and slide the desired color into the  
holder. Replace the holder in the unit and screw in tightly.  
Gobo - The ZX-30RG is supplied with 4 interchangeable gobos. To change/insert a gobo, remove  
the screw on the bottom of the unit securing the gobo holder. Remove the gobo and replace with the  
desired gobo. Replace the gobo holder in the ZX-30RG and secure the screw tightly. The ZX-30RG  
will accept custom gobos. The gobo has a diameter of 25 mm. The image area has a diameter of  
18mm.  
Installation / Mounting  
Although this unit can be used in an upright position, it is recommended that, for safety purposes,  
your lighting effect be properly mounted using a suitable hanging clamp and safety cable. CHAUVET  
offers a range of items, which are ideal for safe mounting.  
Replacing Lamps  
1. Disconnect from main power supply before attempting to replace either lamps or fuse.  
2. Ensure that the unit is sufficiently cool, before removing blown lamps.  
3. Never touch new lamps with your fingers; use a tissue or a cloth.  
In order to replace the lamp, disconnect from main power supply first, and unscrew the lamp  
replacement cover, which is highlighted on the diagram (fig.1). Only use the appropriately rated  
lamps as use of any other lamp type may cause the unit to be non-operational.  
Due to the nature of halogen lamps it is vitally important that you do not touch the new replacement  
lamp with your fingers, as this will reduce lamp life considerably. Once again a tissue or cloth can be  
used for fitting the replacement lamp.  
Finally before using, check that the lamp is housed correctly in the lamp holder and that the lamp  
replacement cover has been screwed back into place.  
If after replacement of the lamp, the unit is still not working then please contact CHAUVET  
for servicing.  
 
Replacing Fuses  
If the unit does not function at all when connected to the main power supply i.e. the mechanism  
does not spin. Then it is highly likely that the fuse has blown.  
Disconnect from main power supply before attempting to replace either lamps or fuse.  
In order to replace the fuse, disconnect from the main power supply first, and then unscrew the fuse-  
holder cover to reveal the fuse. The unit has a label attached which indicates the correct fuse rating  
and you will also find this listed as part of the specifications for the unit later in this guide. It is most  
important that replacement fuses are of the correct rating. Failure to use the correct fuse could dam-  
age the lighting effect beyond economic repair.  
The fuse should simply be placed inside the holder and the screw cap replaced, when this is  
done connect to the main power supply to check. If the unit is still not working then please contact  
CHAUVET for servicing.  
Cleaning  
The most important part of your lighting effect to keep clean is the lens as it allows the light output to  
transmit. This should be cleaned with a soft damp cloth. The body of the unit may also be cleaned in  
the same way. We recommend internal cleaning be carried out by a fully qualified technician.  
Maintenance & Servicing  
Work on internal parts should be carried out by a qualified technician. Removal of covers other than  
the front to replace lamp or effect dish, or the fuseholder is considered a breach of warranty and will  
not be covered under any such agreement unless authorized first by the company.  
Troubleshooting  
• If the unit is not functional – check main power supply is ʻonʼ and check fuses.  
• If the unit is functional but lamp does not light - lamp may require replacing.  
• If after trying this solution you still have a problem contact CHAUVET.  
Contact Chauvet  
USA  
Tecnical Assistance: 1-800-762-1084 (954) 929-1115  
Caution  
Do not obstruct the air vents or fan.  
Do not touch unit or lamps while hot.  
Never put any objects through the air grill on the top of the unit.  
No user serviceable parts inside, please refer to CHAUVET for service.  
 
Power Connections  
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other  
connections be required they must be carried out with the following configuration.  
Earth = Green/Yellow cable  
Neutral = Blue cable  
Live = Brown cable  
In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection.  
In the UK, it is required that all mains plugs are fitted with 5A fuses.  
Technical Specifications  
Power:  
Fuse:  
110V, 60 Hz or 230V, 50 HZ  
110V - 2A 125V  
220V - 1A 250V  
Lamp:  
Dim:  
15V 150W, EFR5 (500 hours)  
18.5 in x 7 in x 7 in  
470 mm x 178 mm x 178 mm  
6.5 lbs  
Weight:  
2.95 kg  
User Information (Please complete for your records)  
Date Purchased:  
Dealer Stamp  
/
/
Serial No. ___________________  
Model: Precision Series ZX-30RG  
 

Blackberry Cell Phone SWDT643442 941426 0201084713 001 User Manual
Black Box Outboard Motor 5 15R User Manual
Bolens Tiller 12228 User Manual
Bosch Appliances Smoke Alarm D720 User Manual
Bravetti Fryer EP85 User Manual
Broan Ventilation Hood 629004 User Manual
Campbell Hausfeld Air Compressor HL5403 User Manual
Carrier Weather Radio 500 T R User Manual
Celestron Binoculars 72121 User Manual
Century Car Seat Deluxe Series User Manual